Carpet Cleaning Tips:
Spot Removal Steps
Act Quickly! Most carpet available today has been treated with a stain-resist treatment, so many spills can be removed if immediate action is taken. The longer the delay, the higher the probability of a spill becoming a permanent stain. Remember, staining is influenced by many factors, and no carpet is completely stain proof.
Blot liquids with a dry, white, absorbent cloth or white (no printing) paper towels.
Do not scrub the area
Scrubbing can cause pile distortion in the affected area. Continue to use a dry cloth or paper towels until the area is completely dry. For semi-solids, gently scrape up with a rounded spoon. Solids should be broken up and vacuumed until completely removed.
If the spot can be identified, locate the substance in the spot removal computer and follow the directions carefully.
Pretest any spot removal agent in an inconspicuous area to make certain the solution will not damage the fiber or the dye. After applying several drops to the testing area, hold a white cloth on the wet area for 10 seconds. Examine the carpet and cloth for color transfer, color change, or damage to the carpet. If a change occurs, another cleaning solution should be selected.
Apply a small amount of the selected cleaning solution to a white cloth, allow to sit for about 10 minutes and work in gently.
Work from the edges of the spill to the center to prevent the spill from spreading. Do not scrub! Blot, absorbing as much as possible, and repeat if necessary.
Continue using the first cleaning solution as long as there is a transfer of the spill to the cloth. It is not necessary to use all of the cleaning solutions if the first solution removes the spill. Be patient! Complete removal of the spill may require repeating the same step several times.
After the spill has been completely removed, rinse the affected area thoroughly with cold water, and blot with a dry cloth until all of the solution has been removed. Some cleaning solutions will cause rapid soiling if the solution is not completely removed. Apply a one-half inch layer of white paper towels to the affected area, and weigh down with a flat, heavy object. Continue to change paper towels as needed.
A dry, absorbent, cleaning compound may be used as a substitute to accelerate drying time.
Never pour cleaning solutions directly onto the carpet, rug, oriental rug, drapery, etc.
Always brush stains lightly to the centre of the spot to avoid spreading it.
Keep stains moist until a professional cleaner arrives if possible.
Never use commercial cleaners unless you are sure they will remove the stain because you may "set" it.
Pet odour removal cannot be guaranteed because when moisture is present, bacteria feeds on the urine and causes the odour.
Circulate the air to speed up drying time. If possible, slightly open a window to let in fresh air.
Do not allow children or pets to crawl or walk on cleaned carpet for at least 8-12 hours - preferably longer - until carpet is thoroughly dry.
Do not walk on freshly cleaned carpet for at least 4 hours or more until dry to the touch. Use caution when walking from a wet carpet to a bare floor.
Do not remove aluminum or plastic pieces that have been placed under legs of furniture until carpet is absolutely dry.
Vacuum after carpet is dry and then vacuum on a regular schedule.
We think that these suggestions will help keep your carpets looking beautiful and fresh for a long time.
Abrasive wear and stains cannot be included in our guarantee.
|
